FCX18 Fails to Operate After Speed Adjustment

If your FCX18 fails to operate, you can try resolving the issue by adjusting the transmission servo's travel or trim in Mode 2. Here are the steps to follow:

1. Default Mode (Mode 1): When the transmitter is turned on, it is in Mode 1 by default. The R.LED will be continuously on. Adjusting the ST.D/R and ST.TRIM knobs will adjust the steering servo's travel or trim.

2. Entering Mode 2: Quickly press the Bind button twice within 1 second. The R.LED and G.LED will alternately flash, indicating that the transmitter has entered Mode 2.

3. Adjusting in Mode 2: In Mode 2, adjusting the ST.D/R and ST.TRIM knobs will adjust the transmission servo's travel or trim.

4. Throttle Operation in Mode 2: In Mode 2, the throttle should be operational. You can adjust the transmission servo while the throttle is running.

5. Confirm Operation: Once you confirm that both high and low speeds are operational, quickly press the Bind button twice within 1 second to return to Mode 1. The R.LED will be continuously on.

By following these steps, you should be able to troubleshoot and resolve issues with your FCX18's operation.

FMS Official website：https://www.fmshobby.com
FMS Customer Service Hotline：(+1) 8504480101
FMS Service Email：support@fmsmodel.com