Q: How do I calibrate the steering and throttle of my FMS FCX18 K10?
A: Follow these steps to calibrate the steering and throttle:
-
Enter Calibration Mode:
- Turn the steering wheel as far clockwise as it will go and hold the throttle trigger all the way forward.
- Turn on the transmitter to enter calibration mode.
- The R.LED and G.LED will flash twice, and the RX.BATT LED will be solid yellow.
-
Calibrate Steering Wheel:
- Turn the steering wheel to the maximum and minimum travel points in both clockwise and counterclockwise directions.
- The R.LED will turn off, and the RX.BATT LED will be solid red.
-
Calibrate Throttle Trigger:
- Push/pull the throttle trigger to its maximum forward and backward positions.
- When calibration is completed, the G.LED will turn off, and the RX.BATT LED will be solid green.
-
Finish Calibration:
- Both the steering wheel and throttle trigger calibration are complete when the RX.BATT LED turns off.
- Press the BIND button to save the calibration data and exit the calibration mode.
FMS Official website:https://www.fmshobby.com
FMS Customer Service Hotline:(+1) 8504480101
FMS Service Email:support@fmsmodel.com
Comments
0 comments
Please sign in to leave a comment.